贵州兼职女qq-贵州兼职女qq

巴中附近有没有服务

Oil (gas) heat conducting oil furnace

Update: April 10, 2018 10:36:07
Product introduction

Organic heat carrier boiler is a new type of special boiler, also known as heat transfer oil furnace. It has the characteristics of low pressure and high temperature. Its heating temperature can reach 340 ℃ in liquid phase or 400 ℃ in vapor phase. The organic heat carrier can be used in all kinds of production occasions where the heating temperature is between 150 ℃ and 380 ℃ for the process that needs uniform and stable heating and does not allow direct flame heating.  

The oil (gas) organic heat carrier furnace uses oil (gas) as fuel and heat transfer oil as medium. The hot oil circulating pump is used to force the medium to carry out liquid-phase circulation. The heat energy is transferred to the heating equipment and then returned to the heating furnace for reheating. It has high working temperature under low pressure and can control the medium operation with high precision. The system has a high heat utilization rate. Due to the overall installation of modules and convenient operation and maintenance, the system is an ideal heat supply equipment with safety, high quality and energy saving. The high temperature flame of fuel oil (gas) after ignition of burner enters into the inner coil tube to form radiation heating surface, and then rotates 180 ° forward through the rear of inner coil to enter the sandwich zone of inner and outer tubes to form convection heating surface. Then, it enters the second sandwich zone of the middle and outer coils at the upper part of the interlayer, and discharges to the chimney at the rear of the second sandwich zone. Performance features:
(1) Low pressure and high temperature heat medium is obtained, which is convenient to adjust and provide heat evenly, which can meet different process temperatures.
(2) Liquid phase circulating heating, non condensing emission heat loss, high thermal efficiency of heating system.
(3) There are compensation technical measures in the system for the change of volume caused by heating and exothermic of working medium and temperature rise and fall.
(4) Before circulating heating, technical measures are taken to strictly control the air, moisture and other low volatile content in the working medium.  


Description of control system:

  The organic heat carrier furnace is controlled by a more advanced program controller, which can realize all kinds of functions necessary for normal combustion. It can automatically implement protective alarm in normal state, accident state and abnormal situation. With corresponding liquid level controller, pressure controller and temperature controller, it can realize inlet and outlet pressure indication and inlet and outlet temperature indication, and ensure the normal temperature of heat carrier The pressure is within the allowable range.